This machine consists of 4 parts: paper feeding part, 2 sets of printing, and die-cutting part. It can complete the printing, die-cutting, creasing and other processes of three-layer and five-layer corrugated cardboard at one time.
corrugated cardboard two-color printing die-cutting machine
1. The paper is fed by manual unloading chain.
2. Each paper feeding part adopts 4 hanging chains, which can adjust the size of the cardboard, and the size can be customized according to the user’s requirements.
3. Chain tension is manually adjusted. Equipped with a counter to display the production quantity.
4. A pneumatic interlock control switch is installed at the rear of the equipmentto realize emergency stop and inching of the forward and reverse main engine.
printing unit
1. Crew Combination
The push-button switch electrically controls the separation and combination of the machine, and is equipped with an automatic alarm device, which continuously rings the alarm during the running to ensure the safety of the workers.
Pneumatic interlocking device, the locking is firm, convenient and accurate.
The split drive shaft is equipped with an overload protection device to prevent damage to other components.
2. Front paper guide roller
3. Printing plate roller
4. Embossing roller
5. Metal Anilox Roller
6. Rubber roller
7. Ink supply system
8. Phase adjustment mechanism
Related products
เครื่องม้วนสายไฟแบบอัตโนมัติ (Coil winding machine)
เครื่องผสมพีวีซี (High speed mixer) ขนาด 200/500 พร้อม ABB Inveter
เครื่องบดไม้ขนาดใหญ่ 20-30 ตัน/ชั่วโมง
สกรูเครื่องรีดพลาสติก ขนาด SJSZ51/105
- รหัสสินค้า : สกรูเครื่องรีดพลาสติก ขนาด SJSZ51/105
- Diameter ส่วนหัว : 51 mm.
- Diameter ส่วนท้าย : 105 mm
- เหล็กที่ใช้ในการผลิต : 38CrMoAlA หรือ bimetallic ขึ้นอยู่กับความต้องการของลูกค้า
- อายุการใช้งาน : 1-3 ปี ขึ้นอยู่กับวัตถุดิบที่ใช้
เครื่องเสียบหมูปิ้ง
- รหัสสินค้า : เครื่องเสียบหมูปิ้ง หรือ เครื่องเสียบหมู
- ขนาด : 800*270*200mm
- จำนวนเสียบต่อครั้ง : 8 ไม้/1 ครั้ง
- กำลังการผลิต : 1000-2000 ไม้/ชั่วโมง
- น้ำหนักของสินค้า : 20 กิโลกรัม
PVC-WPC FURNITURE/CONCERETE FRAME FOAM BOARD EXTRUSION LINE
- Main extruder and motr : SJZ80/156 conical double screw extruder 75kw
- Co-extruder and motor : SJZ65/132 conical doule screw extruder 37kw
- cooling roller : stainless steel
- haul-off : 8 roller haul-off 5.5kw
- cutter : 2.2kw feeding motor 1.5kw
- output : 450kg/h
SJ65331 SINGLE SCREW HDPEPPPPRPEXABS EXTRUER
- Screw, Barrel : Screw and Barrel Material 38CrMoAlA,Nitriding
- Screw Diameter :65mm
- Screw Length/Diameter Ratio : 33:1
- Main Motor Power : 37 OR 45KW DC motor
- Main Motor Timing Method : Adopt British Eurotherm Inverter
- Gear box : ZLYJ225 rigid gear surface gear box
- Barrel heating : Adopt casting aluminum electrical heater, stainless steel
- cover with cooling fan(SOK)
- Heating Power : 5.4KW×5Zones
- Capacity : 120-150kg/h